This is ed.info, produced by makeinfo version 4.13+ from ed.texi.

INFO-DIR-SECTION Basics
START-INFO-DIR-ENTRY
* Ed: (ed).                     The GNU line editor
END-INFO-DIR-ENTRY

   Copyright (C) 1993, 1994, 2006-2021 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or any
later version published by the Free Software Foundation; with no Invariant
Sections, no Front-Cover Texts, and no Back-Cover Texts.


File: ed.info,  Node: Top,  Next: Overview,  Up: (dir)

The GNU ed line editor
**********************

This manual is for GNU ed (version 1.17, 6 January 2021).

* Menu:

* Overview::                        Overview of the 'ed' command
* Introduction to line editing::    Getting started with GNU 'ed'
* Invoking ed::                     Command line interface
* Line addressing::                 Specifying lines/ranges in the buffer
* Regular expressions::             Patterns for selecting text
* Commands::                        Commands recognized by GNU 'ed'
* Limitations::                     Intrinsic limits of GNU 'ed'
* Diagnostics::                     GNU 'ed' error handling
* Problems::                        Reporting bugs
* GNU Free Documentation License::  How you can copy and share this manual


   Copyright (C) 1993, 1994, 2006-2021 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or any
later version published by the Free Software Foundation; with no Invariant
Sections, no Front-Cover Texts, and no Back-Cover Texts.


File: ed.info,  Node: Overview,  Next: Introduction to line editing,  Prev: Top,  Up: Top

1 Overview
**********

GNU ed is a line-oriented text editor. It is used to create, display, modify
and otherwise manipulate text files, both interactively and via shell
scripts. A restricted version of ed, red, can only edit files in the current
directory and cannot execute shell commands. Ed is the 'standard' text
editor in the sense that it is the original editor for Unix, and thus widely
available. For most purposes, however, it is superseded by full-screen
editors such as GNU Emacs or GNU Moe.

   GNU ed is based on the editor algorithm described in Brian W. Kernighan
and P. J. Plauger's book "Software Tools in Pascal", Addison-Wesley, 1981.

   If invoked with a FILE argument, then a copy of FILE is read into the
editor's buffer. Changes are made to this copy and not directly to FILE
itself. Upon quitting 'ed', any changes not explicitly saved with a 'w'
command are lost.

   Editing is done in two distinct modes: "command" and "input". When first
invoked, 'ed' is in command mode. In this mode commands are read from the
standard input and executed to manipulate the contents of the editor
buffer. A typical command might look like:

     ,s/OLD/NEW/g

   which replaces all occurences of the string OLD with NEW.

   When an input command, such as 'a' (append), 'i' (insert) or 'c'
(change), is given, 'ed' enters input mode. This is the primary means of
adding text to a file. In this mode, no commands are available; instead,
the standard input is written directly to the editor buffer. A "line"
consists of the text up to and including a <newline> character. Input mode
is terminated by entering a single period ('.') on a line.

   All 'ed' commands operate on whole lines or ranges of lines; e.g., the
'd' command deletes lines; the 'm' command moves lines, and so on. It is
possible to modify only a portion of a line by means of replacement, as in
the example above. However even here, the 's' command is applied to whole
lines at a time.

   In general, 'ed' commands consist of zero or more line addresses,
followed by a single character command and possibly additional parameters;
i.e., commands have the structure:

     [ADDRESS[,ADDRESS]]COMMAND[PARAMETERS]

   The ADDRESSes indicate the line or range of lines to be affected by the
command. If fewer addresses are given than the command accepts, then
default addresses are supplied.


File: ed.info,  Node: Introduction to line editing,  Next: Invoking ed,  Prev: Overview,  Up: Top

2 Introduction to line editing
******************************

'ed' was created, along with the Unix operating system, by Ken Thompson and
Dennis Ritchie. It is the refinement of its more complex, programmable
predecessor, 'QED', to which Thompson and Ritchie had already added pattern
matching capabilities (*note Regular expressions::).

   For the purposes of this tutorial, a working knowledge of the Unix shell
'sh' and the Unix file system is recommended, since 'ed' is designed to
interact closely with them. (*Note GNU bash manual: (bash)Top, for details
about bash).

   The principal difference between line editors and display editors is
that display editors provide instant feedback to user commands, whereas
line editors require sometimes lengthy input before any effects are seen.
The advantage of instant feedback, of course, is that if a mistake is made,
it can be corrected immediately, before more damage is done. Editing in
'ed' requires more strategy and forethought; but if you are up to the task,
it can be quite efficient.

   Much of the 'ed' command syntax is shared with other Unix utilities.

   As with the shell, <RETURN> (the carriage-return key) enters a line of
input. So when we speak of "entering" a command or some text in 'ed',
<RETURN> is implied at the end of each line. Prior to typing <RETURN>,
corrections to the line may be made by typing either <BACKSPACE> to erase
characters backwards, or <CONTROL>-u (i.e., hold the CONTROL key and type
u) to erase the whole line.

   When 'ed' first opens, it expects to be told what to do but doesn't
prompt us like the shell. So let's begin by telling 'ed' to do so with the
<P> ("prompt") command:

     $ ed
     P
     *

   By default, 'ed' uses asterisk ('*') as command prompt to avoid
confusion with the shell command prompt ('$').

   We can run Unix shell ('sh') commands from inside 'ed' by prefixing them
with <!> (exclamation mark, aka "bang"). For example:

     *!date
     Mon Jun 26 10:08:41 PDT 2006
     !
     *!for s in hello world; do echo $s; done
     hello
     world
     !
     *

   So far, this is no different from running commands in the Unix shell.
But let's say we want to edit the output of a command, or save it to a
file. First we must capture the command output to a temporary location
called a "buffer" where 'ed' can access it. This is done with 'ed''s <r>
command (mnemonic: "read"):

     *r !cal -m
     137
     *

   Here 'ed' is telling us that it has just read 137 characters into the
editor buffer - i.e., the output of the 'cal' command, which prints a
simple ASCII calendar. To display the buffer contents we issue the <p>
("print") command (not to be confused with the prompt command, which is
uppercase!). To indicate the range of lines in the buffer that should be
printed, we prefix the command with <,> (comma) which is shorthand for "the
whole buffer":

     *,p
           June 2006
     Mo Tu We Th Fr Sa Su
               1  2  3  4
      5  6  7  8  9 10 11
     12 13 14 15 16 17 18
     19 20 21 22 23 24 25
     26 27 28 29 30

     *

   Now let's write the buffer contents to a file named 'junk' with the <w>
("write") command:

     *w junk
     137
     *

   Need we say? It's good practice to frequently write the buffer contents,
since unwritten changes to the buffer will be lost when we exit 'ed'.

   The sample sessions below illustrate some basic concepts of line editing
with 'ed'. We begin by creating a file, 'sonnet', with some help from
Shakespeare. As with the shell, all input to 'ed' must be followed by a
<newline> character. Commands beginning with '#' are taken as comments and
ignored. Input mode lines that begin with '#' are just more input.

     $ ed
     # The 'a' command is for appending text to the editor buffer.
     a
     No more be grieved at that which thou hast done.
     Roses have thorns, and filvers foutians mud.
     Clouds and eclipses stain both moon and sun,
     And loathsome canker lives in sweetest bud.
     .
     # Entering a single period on a line returns 'ed' to command mode.
     # Now write the buffer to the file 'sonnet' and quit:
     w sonnet
     183
     # 'ed' reports the number of characters written.
     q
     $ ls -l
     total 2
     -rw-rw-r--    1 alm           183 Nov 10 01:16 sonnet
     $

   In the next example, some typos are corrected in the file 'sonnet'.

     $ ed sonnet
     183
     # Begin by printing the buffer to the terminal with the 'p' command.
     # The ',' means "all lines".
     ,p
     No more be grieved at that which thou hast done.
     Roses have thorns, and filvers foutians mud.
     Clouds and eclipses stain both moon and sun,
     And loathsome canker lives in sweetest bud.
     # Select line 2 for editing.
     2
     Roses have thorns, and filvers foutians mud.
     # Use the substitute command, 's', to replace 'filvers' with 'silver',
     # and print the result.
     s/filvers/silver/p
     Roses have thorns, and silver foutians mud.
     # And correct the spelling of 'fountains'.
     s/utia/untai/p
     Roses have thorns, and silver fountains mud.
     w sonnet
     183
     q
     $

   Since 'ed' is line-oriented, we have to tell it which line, or range of
lines we want to edit. In the example above, we do this by specifying the
line's number, or sequence in the buffer. Alternatively, we could have
specified a unique string in the line, e.g., '/filvers/', where the '/'s
delimit the string in question. Subsequent commands affect only the
selected line, a.k.a. the "current" line. Portions of that line are then
replaced with the substitute command, whose syntax is 's/OLD/NEW/'.

   Although 'ed' accepts only one command per line, the print command 'p'
is an exception, and may be appended to the end of most commands.

   In the next example, a title is added to our sonnet.

     $ ed sonnet
     183
     a
      Sonnet #50
     .
     ,p
     No more be grieved at that which thou hast done.
     Roses have thorns, and silver fountains mud.
     Clouds and eclipses stain both moon and sun,
     And loathsome canker lives in sweetest bud.
      Sonnet #50
     # The title got appended to the end; we should have used '0a'
     # to append "before the first line".
     # Move the title to its proper place.
     5m0p
      Sonnet #50
     # The title is now the first line, and the current address has been
     # set to the address of this line as well.
     ,p
      Sonnet #50
     No more be grieved at that which thou hast done.
     Roses have thorns, and silver fountains mud.
     Clouds and eclipses stain both moon and sun,
     And loathsome canker lives in sweetest bud.
     wq sonnet
     195
     $

   When 'ed' opens a file, the current address is initially set to the
address of the last line of that file. Similarly, the move command 'm' sets
the current address to the address of the last line moved.

   Related programs or routines are 'vi (1)', 'sed (1)', 'regex (3)', 'sh
(1)'. Relevant documents are:

     Unix User's Manual Supplementary Documents: 12 -- 13

     B. W. Kernighan and P. J. Plauger: "Software Tools in Pascal",
     Addison-Wesley, 1981.


File: ed.info,  Node: Invoking ed,  Next: Line addressing,  Prev: Introduction to line editing,  Up: Top

3 Invoking ed
*************

The format for running 'ed' is:

     ed [OPTIONS] [FILE]
     red [OPTIONS] [FILE]

   FILE specifies the name of a file to read. If FILE is prefixed with a
bang (!), then it is interpreted as a shell command. In this case, what is
read is the standard output of FILE executed via 'sh (1)'. To read a file
whose name begins with a bang, prefix the name with a backslash ('\'). The
default filename is set to FILE only if it is not prefixed with a bang.

   'ed' supports the following options: *Note Argument syntax:
(arg_parser)Argument syntax.

'-h'
'--help'
     Print an informative help message describing the options and exit.

'-V'
'--version'
     Print the version number of 'ed' on the standard output and exit. This
     version number should be included in all bug reports.

'-E'
'--extended-regexp'
     Use extended regular expressions instead of the basic regular
     expressions mandated by POSIX.

'-G'
'--traditional'
     Forces backwards compatibility. This affects the behavior of the 'ed'
     commands 'G', 'V', 'f', 'l', 'm', 't' and '!!'. If the default
     behavior of these commands does not seem familiar, then try invoking
     'ed' with this switch.

'-l'
'--loose-exit-status'
     Don't exit with bad status if a command happens to "fail" (for example
     if a substitution command finds nothing to replace). This can be useful
     when 'ed' is invoked as the editor for crontab.

'-p STRING'
'--prompt=STRING'
     Specifies a command prompt string and turns prompting on. Showing the
     prompt string may be toggled on and off with the 'P' command.

'-r'
'--restricted'
     Run in restricted mode. This mode disables editing of files out of the
     current directory and execution of shell commands.

'-s'
'--quiet'
'--silent'
     Suppresses diagnostics, the printing of byte counts by 'e', 'E', 'r'
     and 'w' commands, and the '!' prompt after a '!' command. This option
     may be useful if 'ed''s standard input is from a script.

'-v'
'--verbose'
     Verbose mode; prints error explanations. This may be toggled on and off
     with the 'H' command.


   Exit status: 0 if no errors occurred; otherwise >0.


File: ed.info,  Node: Line addressing,  Next: Regular expressions,  Prev: Invoking ed,  Up: Top

4 Line addressing
*****************

An address represents the number of a line in the buffer. 'ed' maintains a
"current address" which is typically supplied to commands as the default
address when none is specified. When a file is first read, the current
address is set to the address of the last line of the file. In general, the
current address is set to the address of the last line affected by a
command.

   One exception to the rule that addresses represent line numbers is the
address '0' (zero). This means "at the beginning of the buffer", and is
valid wherever it makes sense.

   An address range is two addresses separated either by a comma (',') or a
semicolon (';'). In a semicolon-delimited range, the current address ('.')
is set to the first address before the second address is calculated. This
feature can be used to set the starting line for searches if the second
address contains a regular expression. The value of the first address in a
range cannot exceed the value of the second.

   Addresses can be omitted on either side of the comma or semicolon
separator. If only the first address is given in a range, then the second
address is set to the given address. If only the second address is given,
the resulting address pairs are '1,addr' and '.;addr' respectively. If a
N-tuple of addresses is given where N > 2, then the corresponding range is
determined by the last two addresses in the N-tuple. If only one address is
expected, then the last address is used. It is an error to give any number
of addresses to a command that requires zero addresses.

   A line address is constructed as follows:

'.'
     The current line (address) in the buffer.

'$'
     The last line in the buffer.

'N'
     The Nth line in the buffer, where N is a number in the range '0,$'.

'+N'
     The Nth next line, where N is a non-negative number.

'-N'
     The Nth previous line, where N is a non-negative number.

'+'
     The next line. This is equivalent to '+1' and may be repeated with
     cumulative effect.

'-'
     The previous line. This is equivalent to '-1' and may be repeated with
     cumulative effect.

','
     The first through last lines in the buffer. This is equivalent to the
     address range '1,$'.

';'
     The current through last lines in the buffer. This is equivalent to the
     address range '.;$'.

'/RE/'
     The next line containing the regular expression RE. The search wraps
     to the beginning of the buffer and continues down to the current line,
     if necessary.

'?RE?'
     The previous line containing the regular expression RE. The search
     wraps to the end of the buffer and continues up to the current line, if
     necessary.

''x'
     The apostrophe-x character pair addresses the line previously marked by
     a 'k' (mark) command, where 'x' is a lower case letter from the
     portable character set '[a-z]'.


   Addresses can be followed by one or more address offsets, optionally
separated by whitespace. Offsets are constructed as follows:

   * '+' or '-' followed by a number adds or subtracts the indicated number
     of lines to or from the address.

   * '+' or '-' not followed by a number adds or subtracts 1 to or from the
     address.

   * A number adds the indicated number of lines to the address.


   It is not an error if an intermediate address value is negative or
greater than the address of the last line in the buffer. It is an error if
the final address value is negative or greater than the address of the last
line in the buffer. It is an error if a search for a RE fails to find a
matching line.


File: ed.info,  Node: Regular expressions,  Next: Commands,  Prev: Line addressing,  Up: Top

5 Regular expressions
*********************

Regular expressions are patterns used in selecting text. For example, the
'ed' command

     g/STRING/

prints all lines containing STRING. Regular expressions are also used by
the 's' command for selecting old text to be replaced with new text.

   In addition to specifying string literals, regular expressions can
represent classes of strings. Strings thus represented are said to be
matched by the corresponding regular expression. If it is possible for a
regular expression to match several strings in a line, then the left-most
match is the one selected. If the regular expression permits a variable
number of matching characters, the longest sequence starting at that point
is matched.

   A null RE is equivalent to the last RE encountered.

   The following symbols are used in constructing regular expressions using
POSIX basic regular expression syntax:

'C'
     Any character C not listed below, including '{', '}', '(', ')', '<'
     and '>', matches itself.

'\C'
     Any backslash-escaped character C, other than '{', '}', '(', ')', '<',
     '>', 'b', 'B', 'w', 'W', '+' and '?', matches itself.

'.'
     Matches any single character.

'[CHAR-CLASS]'
     Matches any single character in CHAR-CLASS. To include a ']' in
     CHAR-CLASS, it must be the first character. A range of characters may
     be specified by separating the end characters of the range with a '-',
     e.g., 'a-z' specifies the lower case characters. The following literal
     expressions can also be used in CHAR-CLASS to specify sets of
     characters:

          [:alnum:] [:cntrl:] [:lower:] [:space:]
          [:alpha:] [:digit:] [:print:] [:upper:]
          [:blank:] [:graph:] [:punct:] [:xdigit:]

     If '-' appears as the first or last character of CHAR-CLASS, then it
     matches itself. All other characters in CHAR-CLASS match themselves.

     Patterns in CHAR-CLASS of the form:
          [.COL-ELM.]
          [=COL-ELM=]

     where COL-ELM is a "collating element" are interpreted according to
     'locale (5)'. See 'regex (7)' for an explanation of these constructs.

'[^CHAR-CLASS]'
     Matches any single character, other than newline, not in CHAR-CLASS.
     CHAR-CLASS is defined as above.

'^'
     If '^' is the first character of a regular expression, then it anchors
     the regular expression to the beginning of a line. Otherwise, it
     matches itself.

'$'
     If '$' is the last character of a regular expression, it anchors the
     regular expression to the end of a line. Otherwise, it matches itself.

'\(RE\)'
     Defines a (possibly null) subexpression RE. Subexpressions may be
     nested. A subsequent backreference of the form '\N', where N is a
     number in the range [1,9], expands to the text matched by the Nth
     subexpression. For example, the regular expression '\(a.c\)\1' matches
     the string 'abcabc', but not 'abcadc'. Subexpressions are ordered
     relative to their left delimiter.

'*'
     Matches zero or more repetitions of the regular expression immediately
     preceding it. The regular expression can be either a single character
     regular expression or a subexpression. If '*' is the first character
     of a regular expression or subexpression, then it matches itself. The
     '*' operator sometimes yields unexpected results. For example, the
     regular expression 'b*' matches the beginning of the string 'abbb', as
     opposed to the substring 'bbb', since a null match is the only
     left-most match.

'\{N,M\}'
'\{N,\}'
'\{N\}'
     Matches the single character regular expression or subexpression
     immediately preceding it at least N and at most M times. If M is
     omitted, then it matches at least N times. If the comma is also
     omitted, then it matches exactly N times. If any of these forms occurs
     first in a regular expression or subexpression, then it is interpreted
     literally (i.e., the regular expression '\{2\}' matches the string
     '{2}', and so on).


   The following extensions to basic regular expression operators are
preceded by a backslash '\' to distinguish them from traditional 'ed'
syntax. They may be unavailable depending on the particular regex
implementation in your system.

'\<'
'\>'
     Anchors the single character regular expression or subexpression
     immediately following it to the beginning (in the case of '\<') or
     ending (in the case of '\>') of a "word", i.e., in ASCII, a maximal
     string of alphanumeric characters, including the underscore (_).

'\`'
'\''
     Unconditionally matches the beginning '\`' or ending '\'' of a line.

'\?'
     Optionally matches the single character regular expression or
     subexpression immediately preceding it. For example, the regular
     expression 'a[bd]\?c' matches the strings 'abc', 'adc' and 'ac'. If
     '\?' occurs at the beginning of a regular expressions or
     subexpression, then it matches a literal '?'.

'\+'
     Matches the single character regular expression or subexpression
     immediately preceding it one or more times. So the regular expression
     'a\+' is shorthand for 'aa*'. If '\+' occurs at the beginning of a
     regular expression or subexpression, then it matches a literal '+'.

'\b'
     Matches the beginning or ending (null string) of a word. Thus the
     regular expression '\bhello\b' is equivalent to '\<hello\>'. However,
     '\b\b' is a valid regular expression whereas '\<\>' is not.

'\B'
     Matches (a null string) inside a word.

'\w'
     Matches any character in a word.

'\W'
     Matches any character not in a word.



File: ed.info,  Node: Commands,  Next: Limitations,  Prev: Regular expressions,  Up: Top

6 Commands
**********

All 'ed' commands are single characters, though some require additonal
parameters. If a command's parameters extend over several lines, then each
line except for the last must be terminated with a backslash ('\').

   In general, at most one command is allowed per line. However, most
commands accept a print suffix, which is any of 'p' (print), 'l' (list), or
'n' (enumerate), to print the last line affected by the command. It is not
portable to give more than one print suffix, but 'ed' allows any
combination of non-repeated print suffixes and combines their effects. If
any suffix letter is given, it must immediately follow the command.

   The 'e', 'E', 'f', 'r', and 'w' commands take an optional FILE
parameter, separated from the command letter by one or more whitespace
characters.

   An interrupt (typically <Control-C>) has the effect of aborting the
current command and returning the editor to command mode.

   'ed' recognizes the following commands. The commands are shown together
with the default address or address range supplied if none is specified (in
parenthesis).

'(.)a'
     Appends text to the buffer after the addressed line. The address '0'
     (zero) is valid for this command; it places the entered text at the
     beginning of the buffer. Text is entered in input mode. The current
     address is set to the address of the last line entered or, if there
     were none, to the addressed line.

'(.,.)c'
     Changes lines in the buffer. The addressed lines are deleted from the
     buffer, and text is inserted in their place. Text is entered in input
     mode. The current address is set to the address of the last line
     entered or, if there were none, to the new address of the line after
     the last line deleted; if the lines deleted were originally at the end
     of the buffer, the current address is set to the address of the new
     last line; if no lines remain in the buffer, the current address is
     set to zero. The lines deleted are copied to the cut buffer.

'(.,.)d'
     Deletes the addressed lines from the buffer. The current address is
     set to the new address of the line after the last line deleted; if the
     lines deleted were originally at the end of the buffer, the current
     address is set to the address of the new last line; if no lines remain
     in the buffer, the current address is set to zero. The lines deleted
     are copied to the cut buffer.

'e FILE'
     Edits FILE, and sets the default filename. If FILE is not specified,
     then the default filename is used. Any lines in the buffer are deleted
     before the new file is read. The current address is set to the address
     of the last line in the buffer.

     If FILE is prefixed with a bang (!), then it is interpreted as a shell
     command whose output is to be read, (*note shell escape command:: '!'
     below). In this case the default filename is unchanged.

     A warning is printed if any changes have been made in the buffer since
     the last 'w' command that wrote the entire buffer to a file.

'E FILE'
     Edits FILE unconditionally. This is similar to the 'e' command, except
     that unwritten changes are discarded without warning.

'f FILE'
     Sets the default filename to FILE. If FILE is not specified, then the
     default unescaped filename is printed.

'(1,$)g/RE/COMMAND-LIST'
     Global command. The global command makes two passes over the file. On
     the first pass, all the addressed lines matching a regular expression
     RE are marked. Then, going sequentially from the beginning of the file
     to the end of the file, the given COMMAND-LIST is executed for each
     marked line, with the current address set to the address of that line.
     Any line modified by the COMMAND-LIST is unmarked. The final value of
     the current address is the value assigned by the last command in the
     last COMMAND-LIST executed. If there were no matching lines, the
     current address is unchanged. The execution of COMMAND-LIST stops on
     the first error.

     The first command of COMMAND-LIST must appear on the same line as the
     'g' command. The other commands of COMMAND-LIST must appear on
     separate lines. All lines of a multi-line COMMAND-LIST except the last
     line must be terminated with a backslash ('\'). Any commands are
     allowed, except for 'g', 'G', 'v', and 'V'. The '.' terminating the
     input mode of commands 'a', 'c', and 'i' can be omitted if it would be
     the last line of COMMAND-LIST. By default, a newline alone in
     COMMAND-LIST is equivalent to a 'p' command. If 'ed' is invoked with
     the command-line option '-G', then a newline in COMMAND-LIST is
     equivalent to a '.+1p' command.

'(1,$)G/RE/'
     Interactive global command. Interactively edits the addressed lines
     matching a regular expression RE. For each matching line, the line is
     printed, the current address is set, and the user is prompted to enter
     a COMMAND-LIST. The final value of the current address is the value
     assigned by the last command executed. If there were no matching
     lines, the current address is unchanged.

     The format of COMMAND-LIST is the same as that of the 'g' command. A
     newline alone acts as a null command list. A single '&' repeats the
     last non-null command list.

'h'
     Help. Prints an explanation of the last error.

'H'
     Toggles the printing of error explanations. By default, explanations
     are not printed. It is recommended that ed scripts begin with this
     command to aid in debugging.

'(.)i'
     Inserts text in the buffer before the addressed line. The address '0'
     (zero) is valid for this command; it places the entered text at the
     beginning of the buffer. Text is entered in input mode. The current
     address is set to the address of the last line entered or, if there
     were none, to the addressed line.

'(.,.+1)j'
     Joins the addressed lines, replacing them by a single line containing
     their joined text. If only one address is given, this command does
     nothing. If lines are joined, the lines replaced are copied to the cut
     buffer and the current address is set to the address of the joined
     line. Else, the current address is unchanged.

'(.)kx'
     Marks a line with a lower case letter 'x'. The line can then be
     addressed as ''x' (i.e., a single quote followed by 'x') in subsequent
     commands. The mark is not cleared until the line is deleted or
     otherwise modified. The current address is unchanged.

'(.,.)l'
     List command. Prints the addressed lines unambiguously. The end of each
     line is marked with a '$', and every '$' character within the text is
     printed with a preceding backslash. Special characters are printed as
     escape sequences. The current address is set to the address of the
     last line printed.

'(.,.)m(.)'
     Moves lines in the buffer. The addressed lines are moved to after the
     right-hand destination address. The destination address '0' (zero) is
     valid for this command; it moves the addressed lines to the beginning
     of the buffer. It is an error if the destination address falls within
     the range of lines to be moved. The current address is set to the new
     address of the last line moved.

'(.,.)n'
     Number command. Prints the addressed lines, preceding each line by its
     line number and a <tab>. The current address is set to the address of
     the last line printed.

'(.,.)p'
     Prints the addressed lines. The current address is set to the address
     of the last line printed.

'P'
     Toggles the command prompt on and off. Unless a prompt string is
     specified with the command-line option '-p', the command prompt is by
     default turned off. The default prompt string is an asterisk ('*').

'q'
     Quits 'ed'. A warning is printed if any changes have been made in the
     buffer since the last 'w' command that wrote the entire buffer to a
     file.

'Q'
     Quits 'ed' unconditionally. This is similar to the 'q' command, except
     that unwritten changes are discarded without warning.

'($)r FILE'
     Reads FILE and appends it after the addressed line. If FILE is not
     specified, then the default filename is used. If there is no default
     filename prior to the command, then the default filename is set to
     FILE. Otherwise, the default filename is unchanged. The address '0'
     (zero) is valid for this command; it reads the file at the beginning
     of the buffer. The current address is set to the address of the last
     line read or, if there were none, to the addressed line.

     If FILE is prefixed with a bang (!), then it is interpreted as a shell
     command whose output is to be read, (*note shell escape command:: '!'
     below). In this case the default filename is unchanged.

'(.,.)s/RE/REPLACEMENT/'
     Substitute command. Replaces text in the addressed lines matching a
     regular expression RE with REPLACEMENT. By default, only the first
     match in each line is replaced. The 's' command accepts any
     combination of the suffixes 'g', 'COUNT', 'l', 'n', and 'p'. If the
     'g' (global) suffix is given, then every match is replaced. The
     'COUNT' suffix, where COUNT is a positive number, causes only the
     COUNTth match to be replaced. 'g' and 'COUNT' can't be specified in
     the same command. 'l', 'n', and 'p' are the usual print suffixes. It
     is an error if no substitutions are performed on any of the addressed
     lines. The current address is set to the address of the last line on
     which a substitution occurred. If a line is split, a substitution is
     considered to have occurred on each of the new lines. If no
     substitution is performed, the current address is unchanged. The last
     line modified is copied to the cut buffer.

     RE and REPLACEMENT may be delimited by any character other than
     <space>, <newline> and the characters used by the form of the 's'
     command shown below. If the last delimiter is omitted, then the last
     line affected is printed as if the print suffix 'p' were specified.
     The last delimiter can't be omitted if the 's' command is part of a
     'g' or 'v' COMMAND-LIST and is not the last command in the list,
     because the meaning of the following escaped newline would become
     ambiguous.

     An unescaped '&' in REPLACEMENT is replaced by the currently matched
     text. The character sequence '\M' where M is a number in the range
     [1,9], is replaced by the Mth backreference expression of the matched
     text. If the corresponding backreference expression does not match,
     then the character sequence '\M' is replaced by the empty string. If
     REPLACEMENT consists of a single '%', then REPLACEMENT from the last
     substitution is used.

     A line can be split by including a newline escaped with a backslash
     ('\') in REPLACEMENT. Each backslash in REPLACEMENT removes the
     special meaning (if any) of the following character.

'(.,.)s'
     Repeats the last substitution. This form of the 's' command accepts
     the 'g' and 'COUNT' suffixes described above, and any combination of
     the suffixes 'p' and 'r'. The 'g' suffix toggles the global suffix of
     the last substitution and resets COUNT to 1. The 'p' suffix toggles
     the print suffixes of the last substitution. The 'r' suffix causes the
     RE of the last search to be used instead of the RE of the last
     substitution (if the search happened after the substitution).

'(.,.)t(.)'
     Copies (i.e., transfers) the addressed lines to after the right-hand
     destination address. If the destination address is '0' (zero), the
     lines are copied at the beginning of the buffer. The current address is
     set to the address of the last line copied.

'u'
     Undoes the effect of the last command that modified anything in the
     buffer and restores the current address to what it was before the
     command. The global commands 'g', 'G', 'v', and 'V' are treated as a
     single command by undo. 'u' is its own inverse; it can undo only the
     last command.

'(1,$)v/RE/COMMAND-LIST'
     This is similar to the 'g' command except that it applies COMMAND-LIST
     to each of the addressed lines not matching the regular expression RE.

'(1,$)V/RE/'
     This is similar to the 'G' command except that it interactively edits
     the addressed lines not matching the regular expression RE.

'(1,$)w FILE'
     Writes the addressed lines to FILE. Any previous contents of FILE are
     lost without warning. If there is no default filename, then the
     default filename is set to FILE, otherwise it is unchanged. If no
     filename is specified, then the default filename is used. The current
     address is unchanged.

     If FILE is prefixed with a bang (!), then it is interpreted as a shell
     command and the addressed lines are written to its standard input,
     (*note shell escape command:: '!' below). In this case the default
     filename is unchanged. Writing the buffer to a shell command does not
     prevent the warning to the user if an attempt is made to overwrite or
     discard the buffer via the 'e' or 'q' commands.

'(1,$)wq FILE'
     Writes the addressed lines to FILE, and then executes a 'q' command.

'(1,$)W FILE'
     Appends the addressed lines to the end of FILE. This is similar to the
     'w' command, except that the previous contents of FILE are not
     clobbered. The current address is unchanged.

'(.)x'
     Copies (puts) the contents of the cut buffer to after the addressed
     line. The current address is set to the address of the last line
     copied.

'(.,.)y'
     Copies (yanks) the addressed lines to the cut buffer. The cut buffer is
     overwritten by subsequent 'c', 'd', 'j', 's', or 'y' commands. The
     current address is unchanged.

'(.+1)zN'
     Scroll. Prints N lines at a time starting at addressed line, and sets
     window size to N. If N is not specified, then the current window size
     is used. Window size defaults to screen size minus two lines, or to 22
     if screen size can't be determined. The current address is set to the
     address of the last line printed.

'!COMMAND'
     Shell escape command. Executes COMMAND via 'sh (1)'. If the first
     character of COMMAND is '!', then it is replaced by the text of the
     previous '!COMMAND'. Thus, '!!' repeats the previous '!COMMAND'. 'ed'
     does not process COMMAND for backslash ('\') escapes. However, an
     unescaped '%' is replaced by the default filename. When the shell
     returns from execution, a '!' is printed to the standard output. The
     current address is unchanged.

'(.,.)#'
     Begins a comment; the rest of the line, up to a newline, is ignored.
     If a line address followed by a semicolon is given, then the current
     address is set to that address. Otherwise, the current address is
     unchanged.

'($)='
     Prints the line number of the addressed line. The current address is
     unchanged.

'(.+1)<newline>'
     Null command. An address alone prints the addressed line. A <newline>
     alone is equivalent to '+1p'. The current address is set to the
     address of the printed line.



File: ed.info,  Node: Limitations,  Next: Diagnostics,  Prev: Commands,  Up: Top

7 Limitations
*************

If the terminal hangs up, 'ed' attempts to write the buffer to the file
'ed.hup' or, if this fails, to '$HOME/ed.hup'.

   'ed' processes FILE arguments for backslash escapes, i.e., in a
filename, any character preceded by a backslash ('\') is interpreted
literally. For example, 'ed 'hello\tworld'' will edit the file
'hellotworld'.

   If a text (non-binary) file is not terminated by a newline character,
then 'ed' appends one on reading/writing it. In the case of a binary file,
'ed' does not append a newline on reading/writing. A binary file is one
containing at least one ASCII NUL character. If the last line has been
modified, reading an empty file, for example /dev/null, prior to writing
prevents appending a newline to a binary file.

   In order to keep track of the text lines in the buffer, 'ed' uses a
doubly linked list of structures containing the position and size of each
line. This results in a per line overhead of 2 'pointer's, 1 'long int',
and 1 'int'.


File: ed.info,  Node: Diagnostics,  Next: Problems,  Prev: Limitations,  Up: Top

8 Diagnostics
*************

When an error occurs, if 'ed''s input is from a regular file or here
document, then it exits, otherwise it prints a '?' and returns to command
mode. An explanation of the last error can be printed with the 'h' (help)
command.

   If the 'u' (undo) command occurs in a global command list, then the
command list is executed only once.

   Attempting to quit 'ed' or edit another file before writing a modified
buffer results in an error. If the command is entered a second time, it
succeeds, but any changes to the buffer are lost.


File: ed.info,  Node: Problems,  Next: GNU Free Documentation License,  Prev: Diagnostics,  Up: Top

9 Reporting bugs
****************

There are probably bugs in 'ed'. There are certainly errors and omissions
in this manual. If you report them, they will get fixed. If you don't, no
one will ever know about them and they will remain unfixed for all
eternity, if not longer.

   If you find a bug in 'ed', please send electronic mail to
<bug-ed@gnu.org>. Include the version number, which you can find by running
'ed --version'.


File: ed.info,  Node: GNU Free Documentation License,  Prev: Problems,  Up: Top

10 GNU Free Documentation License
*********************************

                       Version 1.3, 3 November 2008

     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
     'http://fsf.org/'

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document "free" in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or noncommercially.
     Secondarily, this License preserves for the author and publisher a way
     to get credit for their work, while not being considered responsible
     for modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.  It
     complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for free
     software, because free software needs free documentation: a free
     program should come with manuals providing the same freedoms that the
     software does.  But this License is not limited to software manuals;
     it can be used for any textual work, regardless of subject matter or
     whether it is published as a printed book.  We recommend this License
     principally for works whose purpose is instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium, that
     contains a notice placed by the copyright holder saying it can be
     distributed under the terms of this License.  Such a notice grants a
     world-wide, royalty-free license, unlimited in duration, to use that
     work under the conditions stated herein.  The "Document", below,
     refers to any such manual or work.  Any member of the public is a
     licensee, and is addressed as "you".  You accept the license if you
     copy, modify or distribute the work in a way requiring permission
     under copyright law.

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter section of
     the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document's overall
     subject (or to related matters) and contains nothing that could fall
     directly within that overall subject.  (Thus, if the Document is in
     part a textbook of mathematics, a Secondary Section may not explain
     any mathematics.)  The relationship could be a matter of historical
     connection with the subject or with related matters, or of legal,
     commercial, philosophical, ethical or political position regarding
     them.

     The "Invariant Sections" are certain Secondary Sections whose titles
     are designated, as being those of Invariant Sections, in the notice
     that says that the Document is released under this License.  If a
     section does not fit the above definition of Secondary then it is not
     allowed to be designated as Invariant.  The Document may contain zero
     Invariant Sections.  If the Document does not identify any Invariant
     Sections then there are none.

     The "Cover Texts" are certain short passages of text that are listed,
     as Front-Cover Texts or Back-Cover Texts, in the notice that says that
     the Document is released under this License.  A Front-Cover Text may
     be at most 5 words, and a Back-Cover Text may be at most 25 words.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images composed of
     pixels) generic paint programs or (for drawings) some widely available
     drawing editor, and that is suitable for input to text formatters or
     for automatic translation to a variety of formats suitable for input
     to text formatters.  A copy made in an otherwise Transparent file
     format whose markup, or absence of markup, has been arranged to thwart
     or discourage subsequent modification by readers is not Transparent.
     An image format is not Transparent if used for any substantial amount
     of text.  A copy that is not "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format, SGML
     or XML using a publicly available DTD, and standard-conforming simple
     HTML, PostScript or PDF designed for human modification.  Examples of
     transparent image formats include PNG, XCF and JPG.  Opaque formats
     include proprietary formats that can be read and edited only by
     proprietary word processors, SGML or XML for which the DTD and/or
     processing tools are not generally available, and the
     machine-generated HTML, PostScript or PDF produced by some word
     processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the material
     this License requires to appear in the title page.  For works in
     formats which do not have any title page as such, "Title Page" means
     the text near the most prominent appearance of the work's title,
     preceding the beginning of the body of the text.

     The "publisher" means any person or entity that distributes copies of
     the Document to the public.

     A section "Entitled XYZ" means a named subunit of the Document whose
     title either is precisely XYZ or contains XYZ in parentheses following
     text that translates XYZ in another language.  (Here XYZ stands for a
     specific section name mentioned below, such as "Acknowledgements",
     "Dedications", "Endorsements", or "History".)  To "Preserve the Title"
     of such a section when you modify the Document means that it remains a
     section "Entitled XYZ" according to this definition.

     The Document may include Warranty Disclaimers next to the notice which
     states that this License applies to the Document.  These Warranty
     Disclaimers are considered to be included by reference in this
     License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and has
     no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License applies
     to the Document are reproduced in all copies, and that you add no other
     conditions whatsoever to those of this License.  You may not use
     technical measures to obstruct or control the reading or further
     copying of the copies you make or distribute.  However, you may accept
     compensation in exchange for copies.  If you distribute a large enough
     number of copies you must also follow the conditions in section 3.

     You may also lend copies, under the same conditions stated above, and
     you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly have
     printed covers) of the Document, numbering more than 100, and the
     Document's license notice requires Cover Texts, you must enclose the
     copies in covers that carry, clearly and legibly, all these Cover
     Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
     the back cover.  Both covers must also clearly and legibly identify
     you as the publisher of these copies.  The front cover must present
     the full title with all words of the title equally prominent and
     visible.  You may add other material on the covers in addition.
     Copying with changes limited to the covers, as long as they preserve
     the title of the Document and satisfy these conditions, can be treated
     as verbatim copying in other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto adjacent
     pages.

     If you publish or distribute Opaque copies of the Document numbering
     more than 100, you must either include a machine-readable Transparent
     copy along with each Opaque copy, or state in or with each Opaque copy
     a computer-network location from which the general network-using
     public has access to download using public-standard network protocols
     a complete Transparent copy of the Document, free of added material.
     If you use the latter option, you must take reasonably prudent steps,
     when you begin distribution of Opaque copies in quantity, to ensure
     that this Transparent copy will remain thus accessible at the stated
     location until at least one year after the last time you distribute an
     Opaque copy (directly or through your agents or retailers) of that
     edition to the public.

     It is requested, but not required, that you contact the authors of the
     Document well before redistributing any large number of copies, to give
     them a chance to provide you with an updated version of the Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document under
     the conditions of sections 2 and 3 above, provided that you release
     the Modified Version under precisely this License, with the Modified
     Version filling the role of the Document, thus licensing distribution
     and modification of the Modified Version to whoever possesses a copy
     of it.  In addition, you must do these things in the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title distinct
          from that of the Document, and from those of previous versions
          (which should, if there were any, be listed in the History section
          of the Document).  You may use the same title as a previous
          version if the original publisher of that version gives
          permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in the
          Modified Version, together with at least five of the principal
          authors of the Document (all of its principal authors, if it has
          fewer than five), unless they release you from this requirement.

       C. State on the Title page the name of the publisher of the Modified
          Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license notice
          giving the public permission to use the Modified Version under the
          terms of this License, in the form shown in the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's license
          notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled "History", Preserve its Title, and
          add to it an item stating at least the title, year, new authors,
          and publisher of the Modified Version as given on the Title Page.
          If there is no section Entitled "History" in the Document, create
          one stating the title, year, authors, and publisher of the
          Document as given on its Title Page, then add an item describing
          the Modified Version as stated in the previous sentence.

       J. Preserve the network location, if any, given in the Document for
          public access to a Transparent copy of the Document, and likewise
          the network locations given in the Document for previous versions
          it was based on.  These may be placed in the "History" section.
          You may omit a network location for a work that was published at
          least four years before the Document itself, or if the original
          publisher of the version it refers to gives permission.

       K. For any section Entitled "Acknowledgements" or "Dedications",
          Preserve the Title of the section, and preserve in the section
          all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document, unaltered in
          their text and in their titles.  Section numbers or the
          equivalent are not considered part of the section titles.

       M. Delete any section Entitled "Endorsements".  Such a section may
          not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled "Endorsements"
          or to conflict in title with any Invariant Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no material
     copied from the Document, you may at your option designate some or all
     of these sections as invariant.  To do this, add their titles to the
     list of Invariant Sections in the Modified Version's license notice.
     These titles must be distinct from any other section titles.

     You may add a section Entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text has
     been approved by an organization as the authoritative definition of a
     standard.

     You may add a passage of up to five words as a Front-Cover Text, and a
     passage of up to 25 words as a Back-Cover Text, to the end of the list
     of Cover Texts in the Modified Version.  Only one passage of
     Front-Cover Text and one of Back-Cover Text may be added by (or
     through arrangements made by) any one entity.  If the Document already
     includes a cover text for the same cover, previously added by you or
     by arrangement made by the same entity you are acting on behalf of,
     you may not add another; but you may replace the old one, on explicit
     permission from the previous publisher that added the old one.

     The author(s) and publisher(s) of the Document do not by this License
     give permission to use their names for publicity for or to assert or
     imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under this
     License, under the terms defined in section 4 above for modified
     versions, provided that you include in the combination all of the
     Invariant Sections of all of the original documents, unmodified, and
     list them all as Invariant Sections of your combined work in its
     license notice, and that you preserve all their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name but
     different contents, make the title of each such section unique by
     adding at the end of it, in parentheses, the name of the original
     author or publisher of that section if known, or else a unique number.
     Make the same adjustment to the section titles in the list of
     Invariant Sections in the license notice of the combined work.

     In the combination, you must combine any sections Entitled "History"
     in the various original documents, forming one section Entitled
     "History"; likewise combine any sections Entitled "Acknowledgements",
     and any sections Entitled "Dedications".  You must delete all sections
     Entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the rules
     of this License for verbatim copying of each of the documents in all
     other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert a
     copy of this License into the extracted document, and follow this
     License in all other respects regarding verbatim copying of that
     document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other separate
     and independent documents or works, in or on a volume of a storage or
     distribution medium, is called an "aggregate" if the copyright
     resulting from the compilation is not used to limit the legal rights
     of the compilation's users beyond what the individual works permit.
     When the Document is included in an aggregate, this License does not
     apply to the other works in the aggregate which are not themselves
     derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half of
     the entire aggregate, the Document's Cover Texts may be placed on
     covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic form.
     Otherwise they must appear on printed covers that bracket the whole
     aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section 4.
     Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also include
     the original English version of this License and the original versions
     of those notices and disclaimers.  In case of a disagreement between
     the translation and the original version of this License or a notice
     or disclaimer, the original version will prevail.

     If a section in the Document is Entitled "Acknowledgements",
     "Dedications", or "History", the requirement (section 4) to Preserve
     its Title (section 1) will typically require changing the actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense, or distribute it is void, and
     will automatically terminate your rights under this License.

     However, if you cease all violation of this License, then your license
     from a particular copyright holder is reinstated (a) provisionally,
     unless and until the copyright holder explicitly and finally
     terminates your license, and (b) permanently, if the copyright holder
     fails to notify you of the violation by some reasonable means prior to
     60 days after the cessation.

     Moreover, your license from a particular copyright holder is
     reinstated permanently if the copyright holder notifies you of the
     violation by some reasonable means, this is the first time you have
     received notice of violation of this License (for any work) from that
     copyright holder, and you cure the violation prior to 30 days after
     your receipt of the notice.

     Termination of your rights under this section does not terminate the
     licenses of parties who have received copies or rights from you under
     this License.  If your rights have been terminated and not permanently
     reinstated, receipt of a copy of some or all of the same material does
     not give you any rights to use it.

 10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of the
     GNU Free Documentation License from time to time.  Such new versions
     will be similar in spirit to the present version, but may differ in
     detail to address new problems or concerns.  See
     'http://www.gnu.org/copyleft/'.

     Each version of the License is given a distinguishing version number.
     If the Document specifies that a particular numbered version of this
     License "or any later version" applies to it, you have the option of
     following the terms and conditions either of that specified version or
     of any later version that has been published (not as a draft) by the
     Free Software Foundation.  If the Document does not specify a version
     number of this License, you may choose any version ever published (not
     as a draft) by the Free Software Foundation.  If the Document
     specifies that a proxy can decide which future versions of this
     License can be used, that proxy's public statement of acceptance of a
     version permanently authorizes you to choose that version for the
     Document.

 11. RELICENSING

     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
     World Wide Web server that publishes copyrightable works and also
     provides prominent facilities for anybody to edit those works.  A
     public wiki that anybody can edit is an example of such a server.  A
     "Massive Multiauthor Collaboration" (or "MMC") contained in the site
     means any set of copyrightable works thus published on the MMC site.

     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
     license published by Creative Commons Corporation, a not-for-profit
     corporation with a principal place of business in San Francisco,
     California, as well as future copyleft versions of that license
     published by that same organization.

     "Incorporate" means to publish or republish a Document, in whole or in
     part, as part of another Document.

     An MMC is "eligible for relicensing" if it is licensed under this
     License, and if all works that were first published under this License
     somewhere other than this MMC, and subsequently incorporated in whole
     or in part into the MMC, (1) had no cover texts or invariant sections,
     and (2) were thus incorporated prior to November 1, 2008.

     The operator of an MMC Site may republish an MMC contained in the site
     under CC-BY-SA on the same site at any time before August 1, 2009,
     provided the MMC is eligible for relicensing.


ADDENDUM: How to use this License for your documents
====================================================

To use this License in a document you have written, include a copy of the
License in the document and put the following copyright and license notices
just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.3
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
replace the "with...Texts." line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of free
software license, such as the GNU General Public License, to permit their
use in free software.



Tag Table:
Node: Top535
Node: Overview1708
Node: Introduction to line editing4172
Node: Invoking ed11443
Node: Line addressing13741
Node: Regular expressions17443
Node: Commands23168
Ref: shell escape command37583
Node: Limitations38605
Node: Diagnostics39697
Node: Problems40342
Node: GNU Free Documentation License40875

End Tag Table


Local Variables:
coding: iso-8859-15
End:
